HDPE Geocells
Geocell for retaining wall construction
GeoCover reference GC-P0090
The expanded panel holds pockets of fill on a slope or wall face. The slope geometry, anchorage and type of infill determine which cell depth and panel layout to request.
Product characteristics
- Listed use
- Retaining walls
Technical data
Read each value with its model, unit and test condition. Where several configurations are shown, select the required grade when requesting a quote.
| Strip finish | Depth H (mm) | Thickness (mm) | Weld spacing A (mm) |
|---|---|---|---|
| Smooth, solid | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Smooth, perforated | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Textured, solid | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Textured, perforated | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Strip finish | Weld tensile strength (N/cm) | Cell joint tensile strength (N/cm) | Strip yield stress (MPa) |
|---|---|---|---|
| Smooth, solid | ≥100 | ≥120 | ≥20 |
| Smooth, perforated | ≥100 | ≥120 | ≥20 |
| Textured, solid | ≥100 | ≥120 | ≥20 |
| Textured, perforated | ≥100 | ≥120 | ≥20 |
| Property | Value |
|---|---|
| Series designation | TGGS |
| Cell depth range in series attributes | 50–250 mm |
| Weld spacing range in series attributes | 330–1,000 mm |
| Standard strip colour | Black |
| Listed depth options | 50, 100, 150, 200, 250 mm |
| Weld spacing options described separately from the finish table | 330–1,600 mm; confirm configuration |
Options in this range
These options describe the range. Specify the required configuration when requesting a quote.
- Cell depth options
- 50–250 mm
- Weld spacing options
- 330–1,000 mm
- Colour options
- Black
Product photos
Product-family video
This footage illustrates the material family. Dimensions and finishes may differ from the selected configuration.