HDPE Geocells
Load-support geocell for roadways
GeoCover reference GC-P0016
The panel expands into cells that limit sideways movement of the infill. State the intended traffic, subgrade and compacted fill thickness so the panel depth and quantity can be checked.
Product characteristics
- Listed use
- Road construction
Technical data
Read each value with its model, unit and test condition. Where several configurations are shown, select the required grade when requesting a quote.
| Strip finish | Depth H (mm) | Thickness (mm) | Weld spacing A (mm) |
|---|---|---|---|
| Smooth, solid | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Smooth, perforated | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Textured, solid | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Textured, perforated | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Strip finish | Weld tensile strength (N/cm) | Cell joint tensile strength (N/cm) | Strip yield stress (MPa) |
|---|---|---|---|
| Smooth, solid | ≥100 | ≥120 | ≥20 |
| Smooth, perforated | ≥100 | ≥120 | ≥20 |
| Textured, solid | ≥100 | ≥120 | ≥20 |
| Textured, perforated | ≥100 | ≥120 | ≥20 |
| Property | Value |
|---|---|
| Series designation | TGGS |
| Cell depth range in series attributes | 50–250 mm |
| Weld spacing range in series attributes | 330–1,000 mm |
| Technical standard cited in product description | GB/T 19274-2003 |
| Strip assembly described | Ultrasonically welded HDPE sheets |
| Standard strip colour | Black |
| Listed depth options | 50, 100, 150, 200, 250 mm |
| Weld spacing options described separately from the finish table | 330–1,600 mm; confirm configuration |
Options in this range
These options describe the range. Specify the required configuration when requesting a quote.
- Cell depth options
- 50–250 mm
- Weld spacing options
- 330–1,000 mm
- Colour options
- Black
Product photos
Product-family video
This footage illustrates the material family. Dimensions and finishes may differ from the selected configuration.