HDPE Geocells
30 mm cellular drainage panel
GeoCover reference GC-P0013
Open cells leave space for water to travel below a surface layer. Specify the panel thickness, overlying load and the discharge route.
Product characteristics
The listed cell depth is 30 mm. It describes the height of the cell wall and helps determine how much infill the expanded panel will hold.
- Cell depth
- 30 mm
- Structure
- Cellular
- Listed use
- Drainage
Technical data
Read each value with its model, unit and test condition. Where several configurations are shown, select the required grade when requesting a quote.
| Strip finish | Depth H (mm) | Thickness (mm) | Weld spacing A (mm) |
|---|---|---|---|
| Smooth, solid | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Smooth, perforated | 50≤H≤250 | 1.0–1.2 | 330≤A≤1000 |
| Textured, solid | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Textured, perforated | 50≤H≤250 | 1.5–1.7 | 330≤A≤1000 |
| Strip finish | Weld tensile strength (N/cm) | Cell joint tensile strength (N/cm) | Strip yield stress (MPa) |
|---|---|---|---|
| Smooth, solid | ≥100 | ≥120 | ≥20 |
| Smooth, perforated | ≥100 | ≥120 | ≥20 |
| Textured, solid | ≥100 | ≥120 | ≥20 |
| Textured, perforated | ≥100 | ≥120 | ≥20 |
| Property | Value |
|---|---|
| Series designation | TGGS |
| Cell depth range in series attributes | 50–250 mm |
| Weld spacing range in series attributes | 330–1,000 mm |
| Standard strip colour | Black |
| Listed depth options | 50, 100, 150, 200, 250 mm |
| Weld spacing options described separately from the finish table | 330–1,600 mm; confirm configuration |
Options in this range
These options describe the range. Specify the required configuration when requesting a quote.
- Cell depth options
- 50–250 mm
- Weld spacing options
- 330–1,000 mm
- Colour options
- Black
Product photos
Product-family video
This footage illustrates the material family. Dimensions and finishes may differ from the selected configuration.