Drainage Boards & Cells
30 mm drainage cell for garage roofs
GeoCover reference GC-P0217
The panel keeps a drainage space open behind a facing or beneath a surface layer. State its installation orientation, expected compressive load and the direction water must travel.
Product characteristics
The panel height is 30 mm. Allow for this layer when setting the finished surface elevation.
- Panel height
- 30 mm
- Listed use
- Garage roofs, Drainage
Technical data
Read each value with its model, unit and test condition. Where several configurations are shown, select the required grade when requesting a quote.
| Property | Unit | BDrain-C40 | BDrain-C50 |
|---|---|---|---|
| Panel dimensions | mm | 400 × 400 × 30 | 500 × 500 × 30 |
| Material | — | Virgin HDPE | Virgin HDPE |
| Dimple height | mm | 30 | 30 |
| Minimum compressive strength | kPa | 150 | 140 |
| Longitudinal flow capacity | cm³/(s·cm) | 25 | 25 |
| Storage volume | L/m² | 3.0 | 3.0 |
| Surface void area | % | >67 | >67 |
| Internal void area | % | >95 | >95 |
| Biological and chemical resistance | — | Resistant to mould, algae, oils, acids, alkalis and bitumen | Resistant to mould, algae, oils, acids, alkalis and bitumen |
| Service temperature | °C | −20 … 120 | −20 … 120 |
| Property | Listed value |
|---|---|
| Material | HDPE |
| Width | 500 mm |
| Length | 500 mm |
| Height | 30 mm |
| Colour | Black or white |
Options in this range
These options describe the range. Specify the required configuration when requesting a quote.
- Width
- 500 mm
- Length
- 500 mm
- Colour options
- Black, White
Product photos
